New Items

Product Details:

Size :- outside Roo Tilt Bin Cabinet Dimension in mm:- 50(L) x 73(W) x 92 (H)
Outside Roo Tilt Bin Dimenssion in mm:- 69(L1) /42 (L2) x 62(W) x 80(H1) 69(H2).
Inside Roo Tile Bin Diamentions in mm :- 38(L) x 56(W) x 80(H1) 69(H2).
Colour :- Roo Tilt Bin - Transparent.

Additional Information:

• Delivery Time: with in a week

Product Details:

 Each case contains 4 pads with 30 layers per pad for a total of 120 layers • Tacky polyethelene surface: 1/8" thick (total thickness with all 30 layers - thickness will diminish with each sheet used) Material: Polyethylene • Pad Thickness: 1.8 mm. • Numbering: Mark Numbers (1 to 30) On Thirty Peel Tags • Adhesive Power: 160 g / 25mm +/- 10

Additional Information:

• Delivery Time: 6 to 7 Days

Product Details:

We are one of the leading manufacturers and suppliers Puf Panel.

Puf Panel Rockwool Panel, Puf partition, Roof Panel, Puf Shelter, porta Cabin

Product Details:

Surface Preparation:

• Through surface, preparation is a must for best results i.e. surface preparation is the key to the durability of coatings. It should be ensured that the surface on which the primer is going to be applied is rough in nature.
• The concrete must be made clean, dry and free of any oil, grease or other bond breaking contamination. CDS (Clean, Dry, and Sound) test is to be conducted on the concrete.
• It is also of prime importance that the substrate shall not suffer from rising dampness of moisture content more than 5%. A moisture test is conducted by a moisture meter or plastic sheet method (ASTM D4263: a Standard test method for indicating moisture in concrete). Surface preparation likes grinding etc is done to achieve a surface profile of 150-200 microns.

Groove Cutting and Filling:

• The groove is cut manually and cleaned properly for removal of dust. The cleaned grooves are filled in with our filling material.

Priming:

• The primer coat is a thin mild coating which penetrates into the concrete and forms and cohesive bond. The primer provides excellent adhesion to the concrete / cementitious substrates.
• Epoxy based primer is applied to the prepared surface, which is solventless, low viscous, two component epoxy.

Screed:

• EPU screed consists of 3 parts i.e. resin, hardener and the aggregates, which gives maximum strength and protection to the coatings.

Top Coat:

• Epoxy: Epoxy self-leveling flooring is a four-component self-leveling system based on pure liquid epoxy resin cured with a special grade of cyclo-aliphatic amine.
• PU: PU is an aromatic based roll-on with a coating, which has excellent abrasion resistance.
• EPU: EPU is hybrid chemistry of epoxy and urethane.